Silicon nanoparticles decrease arsenic translocation and mitigate phytotoxicity in tomato plants

Environmental Science and Pollution Research - In this study, we simulate the irrigation of tomato plants with arsenic (As)-contaminated water (from 0 to 3.2 mg L?1) and investigate...     

Transcriptional profiles induced by the Aryl Hydrocarbon Receptor agonists 2,3,7,8-tetrachlorodibenzo-p-dioxin, 2,3,7,8-tetrachlorodibenzofuran and 2,3,4,7,8-pentachlorodibenzofuran in primary rat hepatocytes

Toxicogenomics was used to examine mRNA expression profiles obtained from primary rat hepatocytes treated for 24 h with 0.01 or 1.0 nM 2,3,7,8-tetrachlorodibenzo-p-dioxin (2,3,7,8-TCDD), 0.02 or 2.0 nM 2,3,4,7,8-pentachlorodibenzofuran (2,3,4,7,8-PeCDF) and 0.1 or 10 nM 2,3,7,8-tetrachlorodibenzofuran (2,3,7,8-TCDF). The concentrations of 2,3,4,7,8-PeCDF and 2,3,7,8-TCDF were chosen to be equivalent to 2,3,7,8-TCDD’s concentration based on the toxic equivalency factor/toxic equivalent (TEF/TEQ) method for estimating biological potency. 2,3,7,8-TCDD at 1.0 nM altered the expression of 533 genes; 2,3,4,7,8-PeCDF at 2.0 nM altered 182 genes, and 2,3,7,8-TCDF at 10 nM altered 154 genes. Of these, 57 genes were affected by all three congeners. Agglomerative hierarchical clustering revealed distinct congener-dependent gene subclusters. Principal components analyses of the microarray data revealed that these congeners cluster independently of one another. Data presented here demonstrate that equivalent TEQ concentrations of 2,3,7,8-TCDD, 2,3,4,7,8-PeCDF and 2,3,7,8-TCDF, while altering the expression of a small battery of genes in common, also produce substantial congener specific alterations in gene expression.     

Additional danger of arsenic exposure through inhalation from burning of cow dung cakes laced with arsenic as a fuel in arsenic affected villages in Ganga-Meghna-Brahmaputra plain

In arsenic contaminated areas of the Ganga-Meghna-Brahmaputra (GMB) plain (area 569,749 sq. km; population over 500 million) where traditionally cow dung cake is used as a fuel in unventilated ovens for cooking purposes, people are simply exposed to 1859.2 ng arsenic per day through direct inhalation, of which 464.8 ng could be absorbed in respiratory tract.     

Co-processing of DVDs and CDs with vegetable cooking oil by thermal degradation

Waste DVDs and CDs were thermally degraded at 450°C by a semibatch process. In total, 40–50 wt% was converted into liquid product that consisted of phenol derivatives (∼75 wt%), bisphenol (∼10 wt%) and its derivatives, and small amounts of aromatic hydrocarbons such as benzene, toluene, ethylbenzene, dimethylbenzene, methylethylbenzene, diethylbenzene, and methylisopropyl benzene. Degradation of the polycarbonate support from DVDs and CDs was enhanced by coprocessing with vegetable cooking oil, the degradation of which gave a homologue series of hydrocarbons and organic acids with up to 25 and 18 atoms of carbon, respectively. Silver from the reflective coating on DVDs and CDs remained in the solid residue, its concentration increasing about 2.5 times compared to that of the original disks.     

Individual and simultaneous degradation of brominated high impact polystyrene and brominated acrylonitrile-butadiene-styrene and removal of heteroelements (Br,N, and O) from degradation oil by multiphase catalytic systems

Brominated high-impact polystyrene (HIPS-Br), which contained decabromodiphenyl ether flame retardant, and brominated acrylonitrile butadiene styrene (ABS-Br), which contained bromine-containing epoxy-type flame retardant, were degraded at 450°C individually and in a 1/1 mixture by a thermal and catalytic procedure using folded sheet mesoporous (FSM) and ZSM-5 zeolite in liquid phase contact mode. The two polymers produced similar degradation oils but at a higher yield for HIPS-Br. However, the composition and distribution of Br-, N-, and O-containing compounds depended on the type of flame retardant in HIPS-Br and ABS-Br. Multiphase catalytic systems consisting of FSM in liquid phase contact mode and various CaH-, FeO-, CoMo-, and NiMo-based catalysts, or combinations of these catalysts, in vapor phase contact mode were used to decrease the amount of heteroatoms (Br, N, and O) in the degradation oils. Each system gave particular results in terms of mass balance and concentrations of heteroatoms. A FSM (liquid phase contact)/CaHC (vapor phase contact) combination was the best catalytic system to remove Br-, N-, and O-containing compounds from degradation oils.     

Toxins and bioactive compounds from cyanobacteria and their implications on human health

Many species of cyanobacteria (blue-green algae) produce secondary metabolites with potent biotoxic or cytotoxic properties. These metabolites differ from the intermediates and cofactor compounds that are essential for cell structural synthesis and energy transduction. The mass growth of cyanobacteria which develop in fresh, brackish and, marine waters commonly contain potent toxins. Cyanobacterial toxins or cyanotoxins are responsible for or implicated in animal poisoning, human gastroenteritis, dermal contact irritations and primary liver cancer in humans. These toxins (microcystins, nodularins, saxitoxins, anatoxin-a, anatoxin-a(s), cylindrospermopsin) are structurally diverse and their effects range from liver damage, including liver cancer to neurotoxicity. Several incidents of human illness and more recently, the death of 60 haemodialysis patients in Caruaru, Brazil, have been linked to the presence of microcystins in water. In response to the growing concern about the non-lethal acute and chronic effects of microcystins, World Health Organization has recently set a new provisional guideline value for microcystin-LR of 1.0 microg/L in drinking water. Cyanobacteria including microcystin-producing strains produce a large number of peptide compounds, e.g. micropeptins, cyanopeptolins, microviridin, circinamide, aeruginosin, with varying bioactivities and potential pharmacological application. This article discusses briefly cyanobacterial toxins and their implications on human health.     

Investigation of some basic water quality parameters of the north Bengal Terai river Kaljani--a tributary of river Torsa, and comparison thereof with the mainstream

Some physico-chemical parameters of Kaljani River were studied in and around Alipurduar municipality. The principal characteristics of Kaljani River are high TSS, Mg-hardness, COD, and Phosphate 'P' Comparison of water quality parameters of the two rivers demonstrated higher range of alkalinity, ammonia 'N' content and chloride content in Torsa than Kaljani. River Kaljani showed higher COD range than Torsa. Mean BOD value of both these rivers ranged between 0.93-1.65 mg/l. Overall TDS content of Kaljani was found to be lower than Torsa. Maximum phosphate 'P' content was observed at the downstream of both the rivers.     

SIMULATING SOIL WATER RECESSION COEFFICIENTS FOR AGRICULTURAL WATERSHEDS1

ABSTRACT: The antecedent precipitation index (API) has been a useful indicator of soil moisture conditions for watershed runoff calculations, and recent attempts to correlate this index with spaceborne microwave observations have been fairly successful. The prognostic equation for soil moisture used in some of the atmospheric general circulation models (GCM) together with Thomthwaite-Mather parameterization of actual evapotranspiration leads to API equations. The recession coefficient for API is found to depend on climatic factors as contained in potential evapotranspiration and to depend on soil texture as reflected by field capacity and permanent wilting point. A recently developed model for global insolation is used with climatological data for Wisconsin to simulate the annual trend of the recession coefficient. Good quantitative agreement is shown with the observed trends at Fennimore and Colby watersheds in Wisconsin. This study suggests that API could be a unifying concept for watershed and atmospheric general circulation modeling.     

Pollution abatement in the indian pulp and paper industry

Summary In this paper, pollutants in air, water and as solids which stem from the paper industry are discussed, and pollution abatement measures are suggested. The Pulp and Paper Industry is highly capital, material and energy intensive and return on investment is very low. This paper reviews some emerging international principles which are effective in reducing both effluent treatment costs per tonne of paper and the mill discharges, to levels where their environmental impacts become far less significant than at present.Mr Avijit Dey is a graduate in Chemical Engineering from Jadavpur University and at present is Design Engineer in the Paper and Process Cell of Development Consultants Ltd, 24-B Park Street, Calcutta 70016, India. Dr B. Sen Gupta is Reader in the Chemical Engineering Department of Jadavpur University, Calcutta. He obtained his BChE and PhD in Chemical Engineering from Jadavpur University and an ME in Chemical Engineering from the Indian Institute of Science, Bangalore. His research interests involve pulp and paper technology, water conservation and management, and pollution control.     

Statistical analysis of the physico-chemical data on the coastal waters of Cochin

Measurements of temperature, salinity, dissolved oxygen, nitrogen as ammonia, nitrate and nitrite, and phosphate along with chlorophyll were carried out at three stations on the coastal waters of Cochin, south west India, at two-levels of the water column over a period of five years. The data set has been factorised using principal component analysis (PCA) for extracting linear relationships existing among a set of variables. A graphical display of the scores generated from the PCA was done by means of boxplots and biplots, which helped in the interpretation of the data. The major factors conditioning the system are related to the input of fresh water from the estuary of the Periyar river and the high organic load of the bottom sediment in the coastal area which results in a reducing environment, as reflected in the parameters of dissolved oxygen, ammoniacal-nitrogen and nitrite-nitrogen. Another factor which contributes to the variation in the system is related to the unloading activity in the port area. The present approach presents a logical way to interpret the complex data of the physico-chemical measurements.